สินค้าทั้งหมด

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

• High average cutters lifespan : about 1.000 m
• High profitability: Extremely low cost/beveled meter/ minute
• Zero maintenance.
• Self-feed.
• Easy-to-handle and easy to use.
• Flexible.

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

- Cordless torque wrench available for torques between 100 - 15,000 Nm with simple torque adjustment

- Thanks to in-house CNC production, all accessories (brackets, nuts, supports, adapters, etc.) are also quickly available

- Gearbox 100% developed and produced in-house in Rhineland-Palatinate since 1980

- 4 gears with 15 torque settings each

- Brushless PowerDrive motor guarantees sustainable use

- Lithium-ion battery with SafetyCell Technology guarantees years of safe battery use

- Drive and gearbox made in Germany

- High speeds for precise and fast bolting

- Electronically controlled and precise torque control: screwdriver switches off automatically after successful screw fastening

- Visual and acoustic signal when a defined battery charge is reached

- Motor and electronics are completely dust-protected

- Quick charger ensures full battery capacity in under 30 minutes. Powerful capacity of 6 Ah for continuous screwdriving

- High-strength special alloys and carefully selected bearings bring out the highest gear quality

- Adjustment via the finely graded pressure reducing valve of the maintenance unit enables an accuracy of +/- 5% for the same screwdriving application

- Available in the torque range from 40 to 12,000 Nm

- 360° rotatable pistol grip allows convenient positioning of the control unit

- Easily accessible right-left operation switching

- The 2-speed gearbox allows up to 44 torque settings to be adjusted

- Vibration-free and low-noise (high level of work ergonomics)

- Due to the continuous overpressure of the drive motor, screwing in heavily polluted environments predestined

- No external air cooling supply required

- 2-speed gearbox right/left

- Electric torque wrenches available from 200 to 15,000 Nm of torque

- 200 torque settings

- Torque cut-off system at target torque with an accuracy of +/- 3.5% for the same joint

- Available in 230 and 110 volts

- High speeds for precise and fast screwdriving

- The control unit can be positioned as required thanks to the 360° freely rotatable drive motor

- With the help of the JUWEL load release, the drive motor turns in the opposite direction of rotation for a short moment when the screw connection is complete. This enables the socket to be easily released.

- Support made of high-strength material

- Mechanical torque multipliers avalaible for torques from 160 to 15,000 Nm

- Accuracy of +/- 2% for the same screwdriving application

- Robust high-performance planetary gear

- Multiple mounts for finely graduated positioning of the reaction arm (support)

- Manually operated, can be used flexibly without external energy

- Effective operation when loosening and tightening screw connections

- Supplied in a quality steel case with contoured foam inlay for safe transportation

- Constant repeatability of +/- 3%

- Minimum torque of 230 Nm

- Maximum torque of 44,500 Nm

- Cassettes available in the size range of 19 - 175 mm

- Quick connect fittings

- Easy drive assembly means less downtime

- Hydraulic torque wrench suitable for heavy-duty applications

- Usable with square and hexagon drive