คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
  • BIBKO ADD-ON SAND AND GRAVEL SEPARATION

    A robust and easy to install separator divides the recycled aggregates into sand and gravel.

    0 บาท
  • BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

    A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

    0 บาท
  • BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

    The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

    The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

    The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

    0 บาท
  • BIBKO FILTER PRESS SOLUTIONS

    - Purification of residual/wash water with fine particles
    - Purification of coloured water
    - Simple handling of the filter cake
    - Little space required, high filtration performance of the system
    - Low operating and maintenance costs

    0 บาท
  • BIBKO COMTEC RECYCLING SYSTEMS

    - Recycling capacity of 4, 10, 20 and 30 m³/h
    - Dosing buffer and a special extension allow for fast discharge into the machine
    - Large capacity wash drum (0.5-3.5 m³) guarantees best performance
    - Compact design. No foundation mobile option available.
    - Light aluminium cover supported by gas pressure springs
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • BIBKO RWS RECYCLING SYSTEMS

    - Recycling capacity of 4, 8, 12 and 18 m³/h
    - Compact design. No foundation mobile option available.
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

    Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

    There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

    CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling,  compound beveling and counter boring.

    0 บาท
  • เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

    The clamshell pipe cold cutter is ideal for all types of pipe cold cuttingbeveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

    0 บาท
  • เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

    The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

    0 บาท
  • -35%
    Battery driven 2-speed torque multiplier Battery driven 2-speed torque multiplier

    เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

    -  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm 

    -  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

    -  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

    -  Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

    ราคาปกติ: 303,345 บาท

    Special Price 197,175 บาท

  • ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

    - alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
    - Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
    - Permanent higher joint quality by continuous rotation of the square drive.

    0 บาท
  • เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-250

    Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.

    0 บาท
  • เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-260

    A state-of-the-art portable inkjet printer which takes product marking and coding to another level.

    It is light, handy and wireless. The printer is fully portable and versatile – you can print customized messages in almost every language on many different types of surfaces.

    It will print text, graphics, 1D and 2D barcodes.

    0 บาท
  • เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3

    BEVEL LENGTH (L): max 22 mm

    BEVEL ANGLE: 15° - 60° (*)0°-60°

    0 บาท
  • -50%
    เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

    เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

    PORTABLE CHAMFER MILLING MACHINE
    K-HFM/KaKi 2014-1-8-E

    45°, 30°, 60° chamfers

    The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

    Application range
    · Sheet metal, pipes, flanges, inside contours, bores, etc.
    · Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

    ราคาปกติ: 63,500 บาท

    Special Price 31,565 บาท

  • -53%
    เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน

    เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator

    Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

    ราคาปกติ: 106,500 บาท

    Special Price 50,000 บาท

  • -20%
    เครื่องบากเหล็กแผ่นและท่อ Cevisa CHP-12 เครื่องบากเหล็กแผ่นและท่อ Cevisa CHP-12

    เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น

    Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

    The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
    Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

    Benefits of plate and tube beveler CHP 12

    • High average cutters lifespan : about 1.000 m
    • High profitability: Extremely low cost/beveled meter/ minute
    • Zero maintenance.
    • Self-feed.
    • Easy-to-handle and easy to use.
    • Flexible.

    ราคาปกติ: 245,000 บาท

    Special Price 195,000 บาท

  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

    - Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
    - Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
    - Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

    The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

    The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

    - alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
    - Torques from 200 Nm up to 50000 Nm.
    - The ideal torque tool in high explosion-risk areas.
    - alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
expand_less