คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

ต่อหน้า
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

    Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

    Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

    - Especially suited for parquet grinding and other working operations that produce light dust
    - Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
    - Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
    - Equipped with a steel container 

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a

    Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a

    Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

    - Tackles up to 420 m3/h 
    - Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
    - Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter 
    - Compact and robust - easy to move and transport
    - Signal lamp showing when it's time to clean the filter
    - Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a

    DC Tromb 400 Twin c/L/a

    With Twin Power against Dust

    - Integrated preseparator
    - Dust extractor and preseparator are separable
    - Long lifetime and robust construction
    - High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal 
    - Dust free removal of the plastic sack (intellibag®)
    - Accessories for many different tasks
    - Holder for accessories and plastic sacks  

    * In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

    Three-phase machines

    Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

    Get rid of large quantites of dust

    The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

    • a new efficient semi-automatic filter cleaning system
    • for easier transportation it has handles both front and rear and the cyclone can be tilted
    • for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
    • equipped with  Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
    • a new more efficient HEPA filter with a larger filter area
    0 บาท
  • เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3

    BEVEL LENGTH (L): max 22 mm

    BEVEL ANGLE: 15° - 60° (*)0°-60°

    0 บาท
ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

ต่อหน้า
expand_less