คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
ต่อหน้า
  • สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)

    Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg

    The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

    0 บาท
  • สว่านแม่เหล็กแบบใช้ลม Euroboor AIR.55 ATEX

    Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg

    The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

    0 บาท
  • สว่านเจาะรางรถไฟ Euroboor RAIL.40S

    Rail drilling machine Ø 12 - 36 mm / 12 kg

    The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.

    Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

    0 บาท
  • สว่านเจาะรางรถไฟ Euroboor RAIL.60S

    Rail drilling machine Ø 12 - 36 mm / 14.4 kg

    The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.

    RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

    0 บาท
  • -50%
    เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

    เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

    PORTABLE CHAMFER MILLING MACHINE
    K-HFM/KaKi 2014-1-8-E

    45°, 30°, 60° chamfers

    The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

    Application range
    · Sheet metal, pipes, flanges, inside contours, bores, etc.
    · Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

    ราคาปกติ: 63,500 บาท

    Special Price 31,565 บาท

  • -53%
    เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน

    เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator

    Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

    ราคาปกติ: 106,500 บาท

    Special Price 50,000 บาท

  • -20%
    เครื่องบากเหล็กแผ่นและท่อ Cevisa CHP-12 เครื่องบากเหล็กแผ่นและท่อ Cevisa CHP-12

    เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น

    Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

    The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
    Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

    Benefits of plate and tube beveler CHP 12

    • High average cutters lifespan : about 1.000 m
    • High profitability: Extremely low cost/beveled meter/ minute
    • Zero maintenance.
    • Self-feed.
    • Easy-to-handle and easy to use.
    • Flexible.

    ราคาปกติ: 245,000 บาท

    Special Price 195,000 บาท

  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
ต่อหน้า
expand_less