สินค้าทั้งหมด

- Available as a cordless or electric torque wrench

- Both versions are available in the torque range from 300 to 1,200 Nm

- Individual supports adapted to your screwing environment are available thanks to our own CNC production

• Electric torque wrench TESB:

- Available with single and dual gears

- 99 torque settings

- have a torque cut-off system with an accuracy of +/- 3.5% for the same joint

- Height adjustable from 950 - 1100 mm

- Two-hand safety operation

- any positioning of the operating unit; Drive motor can be freely rotated 360°, which ensures convenient positioning of the device on the screw connection

- Compact three-stage hydraulic high-performance pump for operating hydraulic torque wrenches

- Aluminum oil tank with oil leveladisplay and thermometer

- Carrying and protective bracket made of steel

- Precision pressure gauge

- Stepless maximum pressure setting from 40-800 bars

- Fixed adjustable maximum pressure for the tool return stroke

- Design for continuous operation

- Hour meter on option

- Digital cordless power torque wrench with display and programming function

- Data can be transferred quickly and easily via Wi-Fi, Bluetooth or USB

- Available in straight and angled versions

- Screw according to a specific torque, angle of rotation or combine torque and angle of rotation

- Available in a torque range from 30 to 5,000 Nm

- Brushless DC motor (no wear due to carbon brushes)

- A variety of screwdriving configurations can be programmed via tablet, computer, mobile phone or directly on the device itself

- User-friendly display - simply set the torque or rotation angle and get started

- Precise measurement using two strain gauges

- Up to 1200 bolting data can be saved according to the "first in first out" principle

- Configuration settings can be password-protected​

- 2-speed gearbox right/left

- Electric Torque wrenches available from 150 to 12,000 Nm of torque

- 200 torque settings

- TTorque cut-off system at target torque with an accuracy of +/- 3.5% for the same joint

- Available in 230 and 110 volts

- Perfect for bolting under tight conditions

- The control unit can be positioned as required thanks to the 360° freely rotatable drive motor

- With the help of the JUWEL load release, the drive motor turns in the opposite direction of rotation for a short moment when the screw connection is complete. This enables the socket to be easily released.

- Support made of high-strength alloy

- Adjustment via the finely graded pressure reducing valve of the maintenance unit enables an accuracy of +/- 5% for the same screwdriving application

- Pneumatic torque wrenches available in the torque range from 40 to 15,000 Nm

- 360° rotatable pistol grip allows convenient positioning of the control unit

- Easily accessible right-left operation switching

- The 2-speed gearbox allows up to 44 torque settings to be adjusted

- Vibration-free and low-noise (high degree of work ergonomics)

- Due to the continuous overpressure of the drive motor, screwing in heavily polluted environments predestined

- No external air cooling supply required

- 4-speed full metal gearbox

- Battery-powered torque wrenches available for torques from 100 - 7,000 Nm

- Available for 10,000 Nm on request

- Brushless PowerDrive motor with 30% higher efficiency

- Lithium-ion battery with SafetyCell Technology

- The motor and electronics are completely protected against dust

- High speeds for precise and fast bolting

- Electronic torque setting

- Optical and acoustic signal when a defined battery charge is reached

- Quick charger ensures the battery is fully charged in less than 30 minutes

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min