คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
ต่อหน้า
  • สว่านแม่เหล็กงานท่อ Euroboor TUBE.30

    Magnetic drilling machine Ø 12 - 30 mm / 10.3 kg

    The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.

    0 บาท
  • สว่านแท่นแม่เหล็กงานท่อ Euroboor TUBE.55S/T

    Magnetic drilling machine Ø 12 - 55 mm / 16 kg

    The portable Euroboor TUBE.55S/T magnetic core drilling machine is suitable for both flat and pipe material and for both drilling and tapping. The magnet of this magnetic core drilling machine offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine cuts holes in metal up to 55 mm and can be used on tube material with a diameter of 80 mm and larger without any effort because of its pivoting magnet. The TUBE.55S/T benefits from Smart Restart technology, a digital display showing the ideal working load and automatic motor shut-off when displacement in any direction is detected by the GYRO-TEC sensor.

    0 บาท
  • สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)

    Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg

    The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

    0 บาท
  • สว่านแม่เหล็กแบบใช้ลม Euroboor AIR.55 ATEX

    Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg

    The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

    0 บาท
  • สว่านเจาะรางรถไฟ Euroboor RAIL.40S

    Rail drilling machine Ø 12 - 36 mm / 12 kg

    The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.

    Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

    0 บาท
  • สว่านเจาะรางรถไฟ Euroboor RAIL.60S

    Rail drilling machine Ø 12 - 36 mm / 14.4 kg

    The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.

    RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

    Three-phase machines

    Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

    Get rid of large quantites of dust

    The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

    • a new efficient semi-automatic filter cleaning system
    • for easier transportation it has handles both front and rear and the cyclone can be tilted
    • for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
    • equipped with  Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
    • a new more efficient HEPA filter with a larger filter area
    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a

    DC Tromb 400 Twin c/L/a

    With Twin Power against Dust

    - Integrated preseparator
    - Dust extractor and preseparator are separable
    - Long lifetime and robust construction
    - High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal 
    - Dust free removal of the plastic sack (intellibag®)
    - Accessories for many different tasks
    - Holder for accessories and plastic sacks  

    * In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a

    Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

    - Tackles up to 420 m3/h 
    - Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
    - Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter 
    - Compact and robust - easy to move and transport
    - Signal lamp showing when it's time to clean the filter
    - Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a

    Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

    Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

    - Especially suited for parquet grinding and other working operations that produce light dust
    - Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
    - Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
    - Equipped with a steel container 

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

    Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

    - Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
    - Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
    - Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

    The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

    The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

    - alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
    - Torques from 200 Nm up to 50000 Nm.
    - The ideal torque tool in high explosion-risk areas.
    - alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

    0 บาท
  • ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

    - The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
    - Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
    - Simple operation and infinitely adjustable pressure setting, up to 700 bar.
    - Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น LEVA

    - The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
    - Small, low weight, reliable - ideal for service use.

    - Simple operation, continuously adjustable up to 700 bar.

    - Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น VELOX

    - Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime. 
    - Simple operation and infinitely adjustable pressure setting up to 700 bar.
    - Suitable for 110V or 230V main grids and voltage controlled mobile power units. 

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น NOVA

    - Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
    - Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
    - Robust compact design for use on the roughest construction sites

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น AT

    - Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
    - alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
    - No checking needed: High repeatability ± 3% for the same bolting process.

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
ต่อหน้า
expand_less