คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

เครื่องบากเหล็กแผ่นและท่อ

OMCA ...The original is still the Best

For more than 50 years OMCA has been setting the standard in portable plate beveling technology.   With each successive technical plateau ... OMCA lead the market.  More than 5 decades evolving their craft and their designs.  OMCA continues to lead the market and set the standard!  

Which OMCA is right for your application?

All OMCA beveling machines are "portable" but some are more portable than others.  When deciding which OMCA is right for your application, you should also consider the frequency of use, the range of plate dimensions you intend to process,  the range of bevel geometries and the range of material types you intend to process.   To help you pick the best machine for your application,  we've provided some resources and reference materials on this site. 

Machine a bevel in a variety of plate materials with automatic feeding.   The plates may be fed into the machine directly, or the machine may be easily setup to follow the edge of a large sheet resting on a bench.   All models can machine a bevel in steel, stainless steel, cast iron, aluminium, alloy titanium, hardoxsuper duplex, etc.   The travel speed for all models is at least 0 to 1.0 meters/min.   Ergonomics are optimized to insure correct posture of the user, easy access to the controls, and low exposure to vibrations.   The cutting tool has inserts so that only a insert may be replaced, rather than the entire cutting tool.   Cutting tool inserts specific to the material being beveled improve cut quality and tool life.   The trolley comes with height adjustment, chip box, chips protection, swivel wheels and brake.   The trolley may be removed. 

Automatic Feed Plate Beveling Machine Model Comparison 

  Art. 900Art. 900 PlusArt. 900 Big PlusArt. 930 ReverseArt. 930 Big ReverseArt. 910 CladArt. 920 JArt. 920 J Reverse
Bevel Profile OMCA ART.900 V groove profile for butt weld joints and edge conditioning OMCA ART.900 Plus V groove profile for butt weld joints and edge conditioning OMCA ART.900 Big Plus V groove profile for butt weld joints and edge conditioning OMCA ART.30 Reverse V groove bottom face profile for butt weld joints and edge conditioning OMCA ART.30 Reverse V groove bottom face profile for butt weld joints and edge conditioning OMCA ART.910 Clad V groove and J chamfer profile for clad stripping and edge conditioning OMCA ART.920 J groove and V chamfer profile for butt weld joints and edge conditioning OMCA ART.920 Reverse bottom face J chamfer and V groove profile for butt weld joints and edge conditioning
Applications   (1) Butt - V Groove Butt - V Groove Butt - V Groove Butt - V Groove
Butt - Square
Edge Conditioning
Butt - V Groove
Butt - Square
Edge Conditioning
Clad Stripping Butt - J Groove Butt - J Groove
Chamfer adjustment: 5 to 33 mm
(50 mm diagonal)
5 to 36 mm to 36°
(56 mm diagonal)
5 to 36 mm to 45°
(56 mm diagonal)
0 to 33 mm
(53 mm diagonal)
74 mm diagonal 15 mm depth
53 mm width
90 mm depth
55 mm width
90 mm depth
64 mm width
Chamfer angle: 15° to 60° 15° to 80° 15° to 80° 0° to 60° 0° to 75° 90° to 75° 0° to 30° 0° to 30°
Plate thickness, Standard  8 to 50 mm
 
8 to 60 mm

8 to 100 mm

8 to 60 mm
 
8 to 70 mm
 
8 to 100 mm
 
8 to 100 mm

8 to 100 mm

Plate thickness options: < 8 mm
8 to 100 mm
8 to 200 mm
< 8 mm
8 to 100 mm
< 8 mm
8 to 100 mm
8 to 200 mm
< 8 mm
8 to 100 mm
none  
 
8 to 200 mm
 
 
8 to 200 mm
 
 
8 to 200 mm
# Feeding Wheels 2 2 4 2 4 4 4 4
Working height 800 to 980 mm 800 to 980 mm 900 to 1095 mm 820 to 970 mm 930 to 1100 mm 930 to 1120 mm 900 to 1095 mm 920 to 1110 mm
Power: 4.0 kW 4.0 kW 5.5 kW 4.0 kW 5.5 kW 4.0 kW 5.5 kW 5.5 kW

Plate Beveling Application Guide

ApplicationMachine
Butt Welded Joint - J-Groove
J groove chamfer bevel profile for weld joint and edge conditioning
ART.920 J Bevel
ART.920 J Reverse
Butt Welded Joint - V-Groove
V groove chamfer bevel profile for weld joint and edge conditioning
ART.900, ART.900 Plus, ART.900 Big Plus, ART.930 Reverse, ART.920 J Bevel, ART.920 J Reverse
Butt Welded Joint - Square
Edge Conditioning
square edge chamfer bevel profile for weld joint and edge conditioning
ART.930 Reverse
Clad Stripping
J groove, V chamfer, square edge bevel profile for clad stripping and edge conditioning
ART.910 Clad

เครื่องบากเหล็กแผ่นและท่อ

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

ต่อหน้า
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

ต่อหน้า
expand_less