สินค้าทั้งหมด

Drill depth 30-100 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

Drill depth 30-100 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

ดูรายละเอียดเพิ่มเติม

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

ดูรายละเอียดเพิ่มเติม

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

ดูรายละเอียดเพิ่มเติม

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

ดูรายละเอียดเพิ่มเติม

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

ดูรายละเอียดเพิ่มเติม

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

ดูรายละเอียดเพิ่มเติม

Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling,  compound beveling and counter boring.

ดูรายละเอียดเพิ่มเติม