คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
  1. BIBKO ADD-ON SAND AND GRAVEL SEPARATION

    รหัสสินค้า : add-on-sand-separation

    A robust and easy to install separator divides the recycled aggregates into sand and gravel.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  2. BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

    รหัสสินค้า : add-on-bucket

    A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  3. BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

    รหัสสินค้า : add on-buffer

    The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

    The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

    The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  4. BIBKO FILTER PRESS SOLUTIONS

    รหัสสินค้า : filter press

    - Purification of residual/wash water with fine particles
    - Purification of coloured water
    - Simple handling of the filter cake
    - Little space required, high filtration performance of the system
    - Low operating and maintenance costs

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  5. BIBKO COMTEC RECYCLING SYSTEMS

    รหัสสินค้า : COMTEC

    - Recycling capacity of 4, 10, 20 and 30 m³/h
    - Dosing buffer and a special extension allow for fast discharge into the machine
    - Large capacity wash drum (0.5-3.5 m³) guarantees best performance
    - Compact design. No foundation mobile option available.
    - Light aluminium cover supported by gas pressure springs
    - Heated option available
    - Hot-dip galvanised for longevity

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  6. BIBKO RWS RECYCLING SYSTEMS

    รหัสสินค้า : RWS

    - Recycling capacity of 4, 8, 12 and 18 m³/h
    - Compact design. No foundation mobile option available.
    - Heated option available
    - Hot-dip galvanised for longevity

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  7. เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

    รหัสสินค้า : Stationary Pipe Cutting & Beveling Machine

    Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

    There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

    CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling,  compound beveling and counter boring.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  8. เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

    รหัสสินค้า : Split Frame Pipe

    The clamshell pipe cold cutter is ideal for all types of pipe cold cuttingbeveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  9. เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

    รหัสสินค้า : ID-OD-Mounted

    The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

    ดูรายละเอียดเพิ่มเติม

    0 บาท

  10. เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

    รหัสสินค้า : 119402

    Three-phase machines

    Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

    Get rid of large quantites of dust

    The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

    • a new efficient semi-automatic filter cleaning system
    • for easier transportation it has handles both front and rear and the cyclone can be tilted
    • for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
    • equipped with  Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
    • a new more efficient HEPA filter with a larger filter area

    ดูรายละเอียดเพิ่มเติม

    0 บาท

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
expand_less