คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
เลือกซื้อโดย
กำลังเลือกซื้อโดย
-
แบรนด์: บิ๊บโก้
, เบรนเนนสตูล, ยูโรบอร์
ตัวเลือกการซื้อ
- ประเภท
- แบรนด์
- ไฟน์ (43)
- อีบีเอส (2)
- ไบเออร์ (25)
- อัลกิโทรนิค (20)
- แบล็คไอรอน (0)
- โอมก้า (5)
- เซวิซ่า (3)
- บิ๊บโก้ (6)
- มารีนแทรเวลลิฟท์ (0)
- ชัตเติ้ลลิฟท์ (0)
- เบรนเนนสตูล (31)
- เมตาโบ (54)
- ยูโรบอร์ (99)
- ดัสค์คอนโทรล (6)
- โนด้า (3)
- โรตาบอช (4)
สินค้าทั้งหมด
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BIBKO RWS RECYCLING SYSTEMS
- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
BIBKO COMTEC RECYCLING SYSTEMS
- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
BIBKO FILTER PRESS SOLUTIONS
- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs0 บาท -
BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE
The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.
The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.
The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.
0 บาท -
BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR
A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.
0 บาท -
BIBKO ADD-ON SAND AND GRAVEL SEPARATION
A robust and easy to install separator divides the recycled aggregates into sand and gravel.
0 บาท -
ดอกสว่านเจ็ทบอช Euroboor TCT Weldon เม็ดมีดคาร์ไบด์ ความลึก 30-100 mm.
Drill depth 30-100 mm
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
0 บาท -
ดอกสว่านเจ็ทบอช Euroboor TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30-55 mm.
Drill depth 30-100 mm
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
0 บาท
