สินค้าทั้งหมด

สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg

The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

0 บาท

สว่านแม่เหล็กแบบใช้ลม Euroboor AIR.55 ATEX

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg

The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

0 บาท

สว่านเจาะรางรถไฟ Euroboor RAIL.40S

Rail drilling machine Ø 12 - 36 mm / 12 kg

The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.

Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

0 บาท

สว่านเจาะรางรถไฟ Euroboor RAIL.60S

Rail drilling machine Ø 12 - 36 mm / 14.4 kg

The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.

RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

0 บาท

-50%

เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

ราคาปกติ: 63,500 บาท

Special Price 31,565 บาท

-53%

เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator

Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

ราคาปกติ: 106,500 บาท

Special Price 50,000 บาท

-20%

เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

High average cutters lifespan : about 1.000 m
High profitability: Extremely low cost/beveled meter/ minute
Zero maintenance.
Self-feed.
Easy-to-handle and easy to use.
Flexible.

ราคาปกติ: 245,000 บาท

Special Price 195,000 บาท

-77%

เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#4)

S/N: 2016-09.400081

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ราคาปกติ: 42,131 บาท

Special Price 9,900 บาท

-77%

เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#3)

S/N: 2016-09.400079

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ราคาปกติ: 42,131 บาท

Special Price 9,900 บาท

-77%

เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ราคาปกติ: 42,131 บาท

Special Price 9,900 บาท

เครื่องเลื่อยตัดและมิลลิ่งท่อไฟน์ RSG/RDG 1500

The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.

- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.

- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.

- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.

- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.

- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ STS 325 R (แบบใช้ลม)

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ AStxe 649-1 (ปรับระยะชักได้)

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ AStx 649-1

Hacksaws for pipes up to Ø 440 mm* (with chain extention)

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

-62%