สินค้าทั้งหมด

-20%

เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

ราคาปกติ: 53,500 บาท

Special Price 42,800 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3

TTHE COMMANDO 40 MAG DRILL

BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

ราคาปกติ: 26,215 บาท

Special Price 20,972 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

THE ELEMENT 30 MAG DRILL

A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

ราคาปกติ: 26,750 บาท

Special Price 21,400 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

ราคาปกติ: 29,425 บาท

Special Price 23,540 บาท

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท

BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

0 บาท

BIBKO FILTER PRESS SOLUTIONS

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

0 บาท

BIBKO COMTEC RECYCLING SYSTEMS

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

BIBKO RWS RECYCLING SYSTEMS

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3

BEVEL LENGTH (L): max 22 mm

BEVEL ANGLE: 15° - 60° (*)0°-60°

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 77 mm

Bevel Angle
15° – 80° (*) 0°-80°

Plate Thickness
8 – 100mm (*) 8- 200 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

0 บาท