คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
  • -20%
    เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile

    เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile

    Element 50 Low profile

    AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

    ราคาปกติ: 53,500 บาท

    Special Price 42,800 บาท

  • -20%
    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3 สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3

    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3

    TTHE COMMANDO 40 MAG DRILL

    BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

    ราคาปกติ: 26,215 บาท

    Special Price 20,972 บาท

  • -20%
    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

    THE ELEMENT 30 MAG DRILL

    A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

    ราคาปกติ: 26,750 บาท

    Special Price 21,400 บาท

  • -20%
    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

    สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

    THE ELEMENT 40 MAG DRILL

    DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

    ราคาปกติ: 29,425 บาท

    Special Price 23,540 บาท

  • BIBKO ADD-ON SAND AND GRAVEL SEPARATION

    A robust and easy to install separator divides the recycled aggregates into sand and gravel.

    0 บาท
  • BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

    A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

    0 บาท
  • BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

    The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

    The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

    The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

    0 บาท
  • BIBKO FILTER PRESS SOLUTIONS

    - Purification of residual/wash water with fine particles
    - Purification of coloured water
    - Simple handling of the filter cake
    - Little space required, high filtration performance of the system
    - Low operating and maintenance costs

    0 บาท
  • BIBKO COMTEC RECYCLING SYSTEMS

    - Recycling capacity of 4, 10, 20 and 30 m³/h
    - Dosing buffer and a special extension allow for fast discharge into the machine
    - Large capacity wash drum (0.5-3.5 m³) guarantees best performance
    - Compact design. No foundation mobile option available.
    - Light aluminium cover supported by gas pressure springs
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • BIBKO RWS RECYCLING SYSTEMS

    - Recycling capacity of 4, 8, 12 and 18 m³/h
    - Compact design. No foundation mobile option available.
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

    Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

    There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

    CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling,  compound beveling and counter boring.

    0 บาท
  • เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

    The clamshell pipe cold cutter is ideal for all types of pipe cold cuttingbeveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

    0 บาท
  • เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

    The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

    0 บาท
  • -35%
    Battery driven 2-speed torque multiplier Battery driven 2-speed torque multiplier

    เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

    -  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm 

    -  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

    -  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

    -  Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

    ราคาปกติ: 303,345 บาท

    Special Price 197,175 บาท

  • ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

    - alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
    - Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
    - Permanent higher joint quality by continuous rotation of the square drive.

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

    Three-phase machines

    Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

    Get rid of large quantites of dust

    The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

    • a new efficient semi-automatic filter cleaning system
    • for easier transportation it has handles both front and rear and the cyclone can be tilted
    • for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
    • equipped with  Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
    • a new more efficient HEPA filter with a larger filter area
    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a

    DC Tromb 400 Twin c/L/a

    With Twin Power against Dust

    - Integrated preseparator
    - Dust extractor and preseparator are separable
    - Long lifetime and robust construction
    - High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal 
    - Dust free removal of the plastic sack (intellibag®)
    - Accessories for many different tasks
    - Holder for accessories and plastic sacks  

    * In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a

    Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

    - Tackles up to 420 m3/h 
    - Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
    - Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter 
    - Compact and robust - easy to move and transport
    - Signal lamp showing when it's time to clean the filter
    - Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a

    Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

    Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

    - Especially suited for parquet grinding and other working operations that produce light dust
    - Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
    - Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
    - Equipped with a steel container 

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

    Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

    0 บาท
  • ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

    - Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
    - Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
    - Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

    The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

    The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

    - alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
    - Torques from 200 Nm up to 50000 Nm.
    - The ideal torque tool in high explosion-risk areas.
    - alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
expand_less