คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
  • BIBKO ADD-ON SAND AND GRAVEL SEPARATION

    A robust and easy to install separator divides the recycled aggregates into sand and gravel.

    0 บาท
  • BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

    A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

    0 บาท
  • BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

    The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

    The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

    The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

    0 บาท
  • BIBKO FILTER PRESS SOLUTIONS

    - Purification of residual/wash water with fine particles
    - Purification of coloured water
    - Simple handling of the filter cake
    - Little space required, high filtration performance of the system
    - Low operating and maintenance costs

    0 บาท
  • BIBKO COMTEC RECYCLING SYSTEMS

    - Recycling capacity of 4, 10, 20 and 30 m³/h
    - Dosing buffer and a special extension allow for fast discharge into the machine
    - Large capacity wash drum (0.5-3.5 m³) guarantees best performance
    - Compact design. No foundation mobile option available.
    - Light aluminium cover supported by gas pressure springs
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • BIBKO RWS RECYCLING SYSTEMS

    - Recycling capacity of 4, 8, 12 and 18 m³/h
    - Compact design. No foundation mobile option available.
    - Heated option available
    - Hot-dip galvanised for longevity

    0 บาท
  • -35%
    Battery driven 2-speed torque multiplier Battery driven 2-speed torque multiplier

    เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

    -  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm 

    -  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

    -  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

    -  Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

    ราคาปกติ: 303,345 บาท

    Special Price 197,175 บาท

  • ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

    - alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
    - Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
    - Permanent higher joint quality by continuous rotation of the square drive.

    0 บาท
  • ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

    - Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
    - Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
    - Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

    The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

    The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

    - alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
    - Torques from 200 Nm up to 50000 Nm.
    - The ideal torque tool in high explosion-risk areas.
    - alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

    0 บาท
  • ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

    - The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
    - Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
    - Simple operation and infinitely adjustable pressure setting, up to 700 bar.
    - Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น LEVA

    - The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
    - Small, low weight, reliable - ideal for service use.

    - Simple operation, continuously adjustable up to 700 bar.

    - Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น VELOX

    - Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime. 
    - Simple operation and infinitely adjustable pressure setting up to 700 bar.
    - Suitable for 110V or 230V main grids and voltage controlled mobile power units. 

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น NOVA

    - Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
    - Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
    - Robust compact design for use on the roughest construction sites

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น AT

    - Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
    - alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
    - No checking needed: High repeatability ± 3% for the same bolting process.

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น AX

    - Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
    - alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น Norwolf

    Hydraulic Wrench System

    The alkitronic/Norwolf X DRIVER SYSTEM - the most revolutionary hydraulic torque wrench system ever created.

    The profiles are totally flat with no extrusions that create hangups. The design, with a smaller cylinder bore but longer levers, creates less stress on all parts. Easier to get into confined areas and around nuts in hard to access spaces.

    With the durability of solid steel design, fewer parts, and clean-lined construction.

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CLD-N

    - alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
    - Torque range: 1,180 Nm to 3,500 Nm.
    - Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CLV

    - Pneumatic torque multipliers for torques up to 3,460 Nm.
    - Multiple fastening connections and series assembly in semi-automatic operations.
    - Perfect for bolted applications in hazardous, explosive environments.

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CL

    - alkitronic CLS: quick, compact torque multiplier for torques of 60 Nm to 3,500 Nm
    - alkitronic CLD: comfortable torque multiplier with rotating handle for torques of 160 Nm to 9,800 Nm
    - alkitronic CLS2: high-performance 2-gear machine for torques of 120 Nm to 48,000 Nm
    - Continuous rotation, tightening, or loosening for all heavy duty fastening connections
    - Perfect for bolted applications in hazardous, explosive environments

     

    0 บาท
  • ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น E

    - alkitronic® E, 2-speed torque multiplier for torques from 200 Nm to 10,000 Nm.
    - The indestructible workaday torque tool is used to loosen or tighten heavy-duty bolted connections with high on-the-job safety and short assembly times.
    - Permanently higher joint quality, compared to ratchet torque tools or tools with impact mechanism, by continuous rotation of the square drive.
    - Efficient operation with short fastening cycles: Fast gear for run down and power gear for highest torques and precision.

    0 บาท
  • ประแจทอร์คทดแรงไฟฟ้าแบบคอยาว รุ่น EFCip-N

    - alkitronic EFCip-N electric multipliers for comfortable operation at deep bolting connections due to extended nose.

    - torque range: 510 Nm to 3,000 Nm.

    - Consistent torque accuracy using all international power supplies 100-253 V / 45-66 Hz even when operating with portable generators.
    - Smart processor-controlled shut-off electronic for precise reproduction of the preselected torque (repeatability ± 3% for the same bolting application).

    0 บาท
  • ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น EF

    - alkitronic EF-S/EF-A electrical torque multipliersfor torques of 430 to 42,000 Nm (315 to 30,980 ft.lbs).
    - Consistent torque accuracy on all international power supplies
    - Precise shut-off torque also operates with voltage-controlled portable generators.
    - Models alkitronic EF-A in angled design with high operating comfort in confined spaces for torques of 430 to 9.800 Nm (315 to 7,230 ft.lbs).

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 1
  2. 2
ต่อหน้า
expand_less