You have no items in your shopping cart.
All Products
Shop By
Currently Shopping by
-
Brands: FEIN
, BAIER, ALKITRONIC, BIBKO, EUROBOOR
Shopping Options
- Category
-
- Power Tools (128)
- Torque Tools (20)
- Concrete Recycling System (6)
- Brands
- FEIN (43)
- EBS (2)
- BAIER (25)
- ALKITRONIC (20)
- BLACKIRON (0)
- OMCA (5)
- CEVISA (3)
- BIBKO (6)
- MARINE TRAVELIFT (0)
- SHUTTLELIFT (0)
- ฺBRENNENSTUHL (31)
- METABO (54)
- EUROBOOR (99)
- DUSTCONTROL (6)
- NODHA (3)
- ROTABROACH (4)
All Products
-
ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG
Code : R/SG- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm. -
Compact angle grinders WSG 17-150 PR DEMO
Code : 72342200230Hacksaws for pipes up to Ø 440 mm* (with chain extention)
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension. -
Compact angle grinders WSG 17-150 PR DEMO
Code : 72342300230Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension. -
Compact angle grinders WSG 17-150 PR DEMO
Code : 75340800000Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension. -
Compact angle grinders WSG 17-150 PR DEMO
Code : fein_pipe_milling_rsg_rdg_1500The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.
- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.
- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.
- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.
- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.
- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.
-
BDB 819 Diamond wet core drilling machine up to Ø 200 mm
Code : 8641Wet core drilling machine for drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 200 mm (8")
- Wide range of application through a 3-speed gear box with high performance lubrication
- The machine can be hand-guided precisely
- With drill stand, very accurate, even with bigger diameters
- Attachable water jet
- Clamping collar Ø 60 mm
- MADE IN GERMANY -
BDB 819 + Drill Stand Diamond wet core drilling machine up to Ø 200 mm
Code : 6806Wet core drilling machine include drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 200 mm (8")
- Wide range of application through a 3-speed gear box with high performance lubrication
- The machine can be hand-guided precisely
- With drill stand, very accurate, even with bigger diameters
- Attachable water jet
- Clamping collar Ø 60 mm
- MADE IN GERMANY -
BDB 817 + Drill Stand Diamond Wet Core Drilling Machine up to Ø 160 mm
Code : 57927Wet core drilling machine include drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 160 mm (6")
- The machine can be hand-guided precisely
- With additional drill stand to cut larger diameters
- 2-speed gear box with a special lubrication
- Clamping collar Ø 60 mm
- MADE IN GERMANY -
BDB 817 Diamond Wet Core Drilling Machine up to Ø 160 mm
Code : 57190Wet core drilling machine in hard stone from Ø 30 mm up to 160 mm (6")
- The machine can be hand-guided precisely
- With additional drill stand to cut larger diameters
- 2-speed gear box with a special lubrication
- Clamping collar Ø 60 mm
- MADE IN GERMANY -
BDB 835 Diamond Wet Core Drilling System Up to Ø 350 mm
Code : 64030Diamond wet core drilling machine for highly precise wet core drilling in extremely hard stone up to ø16"
- Powerfull wet core drilling with 4,500 maximum power and 3,000W nominal power output - up to 185Nm torque
- 3-gear box with special gear case hardened
- Integrated handle for easy transport
- Machine and drill rig can be installed by one person only
- Scope of supply: core drilling machine BDB 835, fixing set and tools
