คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
ต่อหน้า
  • Euroboor MC.3

    Arbor MT3 - 19.05 mm (3/4") Weldon

    For cutters Ø 12 - 60 mm

    0 บาท
  • Euroboor MC.3/32

    Arbor MT3 - 31.75 mm (1 1/4") Weldon

    For cutters Ø 61 - 100 mm

    0 บาท
  • Euroboor MC.3-75

    Arbor MT3 - 19.05 mm (3/4") Weldon

    0 บาท
  • Euroboor PAK.250

    Drilling pipe adapter kit

    DIA Ø 50 - 500 mm

    0 บาท
  • Euroboor VAC.001

    Vacuum pump

    0 บาท
  • Euroboor VAC.002

    Vacuum plate round

    DIA Ø 300 mm

    0 บาท
  • Euroboor VAC.003

    Vacuum plate oval

    DIA Ø 450 x 250 mm

    0 บาท
  • Euroboor VAC.810

    Vacuum adapter kit

    DIA Ø 300 mm

    0 บาท
  • Euroboor VAC.820

    Vacuum adapter kit oval

    450 x 250 mm

    0 บาท
  • เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

    The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

    0 บาท
  • เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

    The clamshell pipe cold cutter is ideal for all types of pipe cold cuttingbeveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

    0 บาท
  • เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

    Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

    There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

    CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling,  compound beveling and counter boring.

    0 บาท
  • ดอกสว่านเจ็ทบอช Euroboor TCT Weldon เม็ดมีดคาร์ไบด์ ความลึก 30-100 mm.

    Drill depth 30-100 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช Euroboor TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30-55 mm.

    Drill depth 30-100 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช China TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 35-100 mm.

    Drill depth 35-100 mm

    China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช China HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 30-55 mm.

    Drill depth 30-55 mm

    China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช China TCT Weldon32 เม็ดมีดคาร์ไบด์ เจาะลึก 35-75 mm.

    Drill depth 35-75 mm

    China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-75 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-75 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช China HSS Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30 mm.

    Drill depth 30 mm

    China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 350 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช Holemaker HSS Nitto เม็ดมีดไฮสปีด เจาะลึก 25-50 mm.

    Drill depth 25-50 mm

    Holemaker Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 25-50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 25-50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช Holemaker TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 50-100 mm.

    Drill depth 50-100 mm

    Holemaker Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช BDS HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 30-55 mm.

    Drill depth 30-55 mm

    BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช BDS TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30-55 mm.

    Drill depth 30-55 mm

    BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช BDS TCT Weldon เม็ดมีดคาร์ไบด์ เจาะลึก 110 mm.

    Drill depth 110 mm

    BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 110 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 110 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่านเจ็ทบอช UNIKA TCT Weldon เม็ดมีดคาร์ไบด์ ความลึก 50-100 mm.

    Drill depth 50-100 mm

    UNIKA Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
ต่อหน้า
expand_less