สินค้าทั้งหมด

Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

ดูรายละเอียดเพิ่มเติม

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

• High average cutters lifespan : about 1.000 m
• High profitability: Extremely low cost/beveled meter/ minute
• Zero maintenance.
• Self-feed.
• Easy-to-handle and easy to use.
• Flexible.

ดูรายละเอียดเพิ่มเติม

S/N: 2016-09.400081

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ดูรายละเอียดเพิ่มเติม

S/N: 2016-09.400079

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ดูรายละเอียดเพิ่มเติม

เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon

Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.

ดูรายละเอียดเพิ่มเติม

The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.

- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.

- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.

- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.

- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.

- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.

ดูรายละเอียดเพิ่มเติม

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
  * With chain extension.

ดูรายละเอียดเพิ่มเติม

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
  * With chain extension.

ดูรายละเอียดเพิ่มเติม

Hacksaws for pipes up to Ø 440 mm* (with chain extention)

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
  * With chain extension.

ดูรายละเอียดเพิ่มเติม