You have no items in your shopping cart.
All Products
Shop By
Currently Shopping by
-
Brands: OMCA
, METABO, EUROBOOR, DUSTCONTROL
Shopping Options
- Category
- Brands
- FEIN (43)
- EBS (2)
- BAIER (25)
- ALKITRONIC (20)
- BLACKIRON (0)
- OMCA (5)
- CEVISA (3)
- BIBKO (6)
- MARINE TRAVELIFT (0)
- SHUTTLELIFT (0)
- ฺBRENNENSTUHL (31)
- METABO (54)
- EUROBOOR (99)
- DUSTCONTROL (6)
- NODHA (3)
- ROTABROACH (4)
All Products
-
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 60°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mmPipe
Ø min 3000 mmFeeding Speed
0 -1.4 mt/min0 THB -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus
Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 80°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mmFeeding Speed
0 -1.4 mt/min0 THB -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus
Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 77 mmBevel Angle
15° – 80° (*) 0°-80°Plate Thickness
8 – 100mm (*) 8- 200 mmFeeding Speed
0 -1.4 mt/min0 THB -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse
Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 59 mmBevel Angle
0° – 60°Plate Thickness
8 – 60 mm (*) 8 – 100 mmFeeding Speed
0 -1.4 mt/min0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container
0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container
- Especially suited for parquet grinding and other working operations that produce light dust
- Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
- Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
- Equipped with a steel container0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h
0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h
- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
DC Tromb 400 Twin c/L/a
With Twin Power against Dust
- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13
0 THB -
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Three-phase machines
Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.
Get rid of large quantites of dust
The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:
- a new efficient semi-automatic filter cleaning system
- for easier transportation it has handles both front and rear and the cyclone can be tilted
- for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
- equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
- a new more efficient HEPA filter with a larger filter area
0 THB -
-20% 
สว่านไขควงไร้สาย 18V metabo BS 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "Regular Price: 12,305 THB
Special Price 9,844 THB
-
-20% 
สว่านไขควงกระแทกไร้สาย 18V metabo SB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill-Ø masonry: 16 mm / 5/8 "- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "- No-load speed: 0 - 550 / 0 - 2000 rpmRegular Price: 12,840 THB
Special Price 10,272 THB
-
สว่านต๊าปเกลียวอัตโนมัติแบบไร้สาย 18V metabo GB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 in-lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs- Max. thread diameter: M 12 (1/2" UNC/UNF)15,515 THB -
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 400 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)
- Speed/torque levels: 12
- Battery voltage: 18 V- Maximum torque: 400 Nm / 295 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)13,250 THB -
-20% 
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 300 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 300 Nm / 220 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)Regular Price: 9,630 THB
Special Price 7,704 THB
-
-20% 
บล็อกกระแทกไร้สาย metabo SSW 18 LT 300 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 3- Battery voltage: 18 V- Maximum torque: 300 Nm- Torque Adjust: 3 steps- Bit retainer: Male square 1/2" (12.70 mm)Regular Price: 7,169 THB
Special Price 5,735 THB
-
-20% 
ไขควงกระแทกไร้สาย metabo SSD 18 LTX 200 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 200 Nm / 150 ft. lbs- Bit retainer: Hexagon recess 1/4" (6.35 mm)Regular Price: 8,025 THB
Special Price 6,420 THB
-
ไขควงกระแทกไร้สาย metabo SSD 18 LT 200 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 3
- Battery voltage: 18 V- Maximum torque: 200 Nm- Bit retainer: Hexagon recess 1/4" (6.35 mm)Regular Price: 6,955 THB
Special Price 5,564 THB
-
สว่านเจาะรางรถไฟ Euroboor RAIL.60S
Rail drilling machine Ø 12 - 36 mm / 14.4 kg
The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.
RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.
0 THB -
สว่านเจาะรางรถไฟ Euroboor RAIL.40S
Rail drilling machine Ø 12 - 36 mm / 12 kg
The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.
Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.
0 THB -
สว่านแม่เหล็กแบบใช้ลม Euroboor AIR.55 ATEX
Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg
The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.
0 THB -
สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)
Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg
The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.
0 THB -
สว่านแท่นแม่เหล็กงานท่อ Euroboor TUBE.55S/T
Magnetic drilling machine Ø 12 - 55 mm / 16 kg
The portable Euroboor TUBE.55S/T magnetic core drilling machine is suitable for both flat and pipe material and for both drilling and tapping. The magnet of this magnetic core drilling machine offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine cuts holes in metal up to 55 mm and can be used on tube material with a diameter of 80 mm and larger without any effort because of its pivoting magnet. The TUBE.55S/T benefits from Smart Restart technology, a digital display showing the ideal working load and automatic motor shut-off when displacement in any direction is detected by the GYRO-TEC sensor.
0 THB -
สว่านแม่เหล็กงานท่อ Euroboor TUBE.30
Magnetic drilling machine Ø 12 - 30 mm / 10.3 kg
The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.
0 THB
