The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

- alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
- Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
- Permanent higher joint quality by continuous rotation of the square drive.

เจาะดอกเจ็ทบอสรูโตสุดได้ 65 ม.ม. ลึก 75 ม.ม., เจาะดอกเกลียวรูโตสุด 25 ม.ม., หัวจับดอกแบบ Weldon, หัวจับดอกถอดเปลี่ยนได้ MT3, ปรับรอบได้ มี 2 เกียร์

Eco magnetic core drill for up to 65 mm. - Powerful and very high-performance 2-speed Eco magnetic core drill with MT3 tool mounting, 75 mm cutting depth and basic functionality for core drilling and twist drilling in the workshop and on the construction site.

สิ่งที่แนบมาด้วย: 1 การ์ดป้องกัน , 1 ด้ามจับ

เครื่องพร้อมชุดแบตเตอรี่และแท่นชาร์จ ALG 80BC High power 18V 5.2Ah, ปรับรอบได้, สวิทช์แบบ Paddle  

Dust-resistant and powerful, compact cordless angle grinder with dead man's switch for effective cutting, grinding and deburring work in assembly jobs.

เจาะดอกเจ็ทบอสรูโตสุดได้ 50 ม.ม. ลึก 75 ม.ม., เจาะดอกเกลียวรูโตสุด 23 ม.ม., หัวจับดอกแบบ Weldon, หัวจับดอกถอดเปลี่ยนได้ MT3, ปรับรอบได้ มี 2 เกียร์

Eco magnetic core drill for up to 50 mm. - Lightweight and powerful 2-speed Eco magnetic core drill with MT3 tool mounting and basic functionality for core drilling and twist drilling in the workshop and on the construction site.

สิ่งที่แนบมาด้วย: 1 แบตเตอรี่, 1 กล่อง , 1 แท่นชาร์จ

Cordless rotary hammer drill Extremely compact and powerful cordless rotary hammer drill with an impact energy of 2 J for drilling up to 20 mm in concrete.

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics