คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
ต่อหน้า
  • ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA

    -  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 90 Nm to 4,000 Nm (65 to 2,950 lbf ft).

    -  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

    -  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

    -  Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.
    0 บาท
  • ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น EFCip

    -  alkitronic EFCip / ECWip Electric Torque Multipliers from 60 to 6,500 Nm.

    -  Consistent Torque accuracy on all international power supplies (100-253 V / 45-66 Hz).

    -  Precise shut-off with on-site voltage-controlled portable generators.

    -  Models ECWip angled tools low height for restricted access applications.

    0 บาท
  • ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น EF

    - alkitronic EF-S/EF-A electrical torque multipliersfor torques of 430 to 42,000 Nm (315 to 30,980 ft.lbs).
    - Consistent torque accuracy on all international power supplies
    - Precise shut-off torque also operates with voltage-controlled portable generators.
    - Models alkitronic EF-A in angled design with high operating comfort in confined spaces for torques of 430 to 9.800 Nm (315 to 7,230 ft.lbs).

    0 บาท
  • ประแจทอร์คทดแรงไฟฟ้าแบบคอยาว รุ่น EFCip-N

    - alkitronic EFCip-N electric multipliers for comfortable operation at deep bolting connections due to extended nose.

    - torque range: 510 Nm to 3,000 Nm.

    - Consistent torque accuracy using all international power supplies 100-253 V / 45-66 Hz even when operating with portable generators.
    - Smart processor-controlled shut-off electronic for precise reproduction of the preselected torque (repeatability ± 3% for the same bolting application).

    0 บาท
  • ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น E

    - alkitronic® E, 2-speed torque multiplier for torques from 200 Nm to 10,000 Nm.
    - The indestructible workaday torque tool is used to loosen or tighten heavy-duty bolted connections with high on-the-job safety and short assembly times.
    - Permanently higher joint quality, compared to ratchet torque tools or tools with impact mechanism, by continuous rotation of the square drive.
    - Efficient operation with short fastening cycles: Fast gear for run down and power gear for highest torques and precision.

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CL

    - alkitronic CLS: quick, compact torque multiplier for torques of 60 Nm to 3,500 Nm
    - alkitronic CLD: comfortable torque multiplier with rotating handle for torques of 160 Nm to 9,800 Nm
    - alkitronic CLS2: high-performance 2-gear machine for torques of 120 Nm to 48,000 Nm
    - Continuous rotation, tightening, or loosening for all heavy duty fastening connections
    - Perfect for bolted applications in hazardous, explosive environments

     

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CLV

    - Pneumatic torque multipliers for torques up to 3,460 Nm.
    - Multiple fastening connections and series assembly in semi-automatic operations.
    - Perfect for bolted applications in hazardous, explosive environments.

    0 บาท
  • ประแจทอร์คทดแรงแบบลม รุ่น CLD-N

    - alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
    - Torque range: 1,180 Nm to 3,500 Nm.
    - Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น Norwolf

    Hydraulic Wrench System

    The alkitronic/Norwolf X DRIVER SYSTEM - the most revolutionary hydraulic torque wrench system ever created.

    The profiles are totally flat with no extrusions that create hangups. The design, with a smaller cylinder bore but longer levers, creates less stress on all parts. Easier to get into confined areas and around nuts in hard to access spaces.

    With the durability of solid steel design, fewer parts, and clean-lined construction.

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น AX

    - Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
    - alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.

    0 บาท
  • ประแจทอร์คไฮดรอลิค รุ่น AT

    - Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
    - alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
    - No checking needed: High repeatability ± 3% for the same bolting process.

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น NOVA

    - Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
    - Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
    - Robust compact design for use on the roughest construction sites

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น VELOX

    - Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime. 
    - Simple operation and infinitely adjustable pressure setting up to 700 bar.
    - Suitable for 110V or 230V main grids and voltage controlled mobile power units. 

    0 บาท
  • ปั๊มไฮดรอลิค รุ่น LEVA

    - The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
    - Small, low weight, reliable - ideal for service use.

    - Simple operation, continuously adjustable up to 700 bar.

    - Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

    0 บาท
  • ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

    - The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
    - Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
    - Simple operation and infinitely adjustable pressure setting, up to 700 bar.
    - Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

    - alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
    - Torques from 200 Nm up to 50000 Nm.
    - The ideal torque tool in high explosion-risk areas.
    - alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

    0 บาท
  • ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

    The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

    The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

    0 บาท
  • ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

    - Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
    - Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
    - Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

    Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 60°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

    Pipe
    Ø min 3000 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

    Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

    Motor Power
    230/400 Volt, 3 Phase
    4kw (4000W), 50/60 Hz

    Bevel Length
    max 55 mm

    Bevel Angle
    15° – 80°

    Plate Thickness
    8 mm – 60 mm (*) 8 mm – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

    Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 77 mm

    Bevel Angle
    15° – 80° (*) 0°-80°

    Plate Thickness
    8 – 100mm (*) 8- 200 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

    Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

    Motor Power
    230/400 Volt, 3 Phase
    5,5KW.( 5500W) 50/60 HZ

    Bevel Length
    max 59 mm

    Bevel Angle
    0° – 60°

    Plate Thickness
    8 – 60 mm (*) 8 – 100 mm

    Feeding Speed
    0 -1.4 mt/min

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

    Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

    0 บาท
  • เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

    Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

    - Especially suited for parquet grinding and other working operations that produce light dust
    - Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
    - Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
    - Equipped with a steel container 

    0 บาท
ตั้งค่าตามลำดับมากไปน้อย

ตาราง รายการ

หน้า:
  1. 1
  2. 2
  3. 3
  4. 4
ต่อหน้า
expand_less