สินค้าทั้งหมด

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Compact 1/2″ HEAVY DUTY model. Extremely durable thanks to its all-aluminium structure, it ensures excellent handling.

BEST SELLER HEAVY DUTY range impact wrench! Aeronautical aluminium 7075 housing for lightness and resistance, all-aluminium body, with side handle. Available with SAFETY SHIELD and Power Regulator.

PROFESSIONAL RANGE impact wrench with an excellent power-to-weight ratio, anti-seize motor, aluminium body, power regulator and side handle.

Lightweight and powerful PROFESSIONAL RANGE impact wrench with a magnesium alloy housing to reduce its weight, side handle and built-in power regulator.

The most compact 1″ drive impact wrench in the PROFESSIONAL RANGE. It combines power and lightness thanks to the composite body and the practical three-level power selector.

- Cordless torque wrench available for torques between 100 - 15,000 Nm with simple torque adjustment

- Thanks to in-house CNC production, all accessories (brackets, nuts, supports, adapters, etc.) are also quickly available

- Gearbox 100% developed and produced in-house in Rhineland-Palatinate since 1980

- 4 gears with 15 torque settings each

- Brushless PowerDrive motor guarantees sustainable use

- Lithium-ion battery with SafetyCell Technology guarantees years of safe battery use

- Drive and gearbox made in Germany

- High speeds for precise and fast bolting

- Electronically controlled and precise torque control: screwdriver switches off automatically after successful screw fastening

- Visual and acoustic signal when a defined battery charge is reached

- Motor and electronics are completely dust-protected

- Quick charger ensures full battery capacity in under 30 minutes. Powerful capacity of 6 Ah for continuous screwdriving

- High-strength special alloys and carefully selected bearings bring out the highest gear quality