สินค้าทั้งหมด

-20%

เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

ราคาปกติ: 53,500 บาท

Special Price 42,800 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3

TTHE COMMANDO 40 MAG DRILL

BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

ราคาปกติ: 26,215 บาท

Special Price 20,972 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

THE ELEMENT 30 MAG DRILL

A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

ราคาปกติ: 26,750 บาท

Special Price 21,400 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

ราคาปกติ: 29,425 บาท

Special Price 23,540 บาท

ดอกสว่านเจ็ทบอช MIRANDA HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 50 mm.

Drill depth 50 mm

MIRANDA Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช SCHIFLER TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 35-100 mm.

Drill depth 100 mm

SCHIFLER Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช SCHIFLER TCT Weldon เม็ดมีดคาร์ไบด์ เจาะลึก 100 mm.

Drill depth 100 mm

SCHIFLER Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช ACT TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 35 mm.

Drill depth 35 mm

ACT Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช RUKO HSS Nitto เม็ดมีดไฮสปีด ความลึก 30-50 mm.

Drill depth 30-50 mm

RUKO Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช RUKO HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 25-50 mm.

Drill depth 25-50 mm

RUKO Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 25-50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 25-50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช UNIKA TCT Weldon เม็ดมีดคาร์ไบด์ ความลึก 50-100 mm.

Drill depth 50-100 mm

UNIKA Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช BDS TCT Weldon เม็ดมีดคาร์ไบด์ เจาะลึก 110 mm.

Drill depth 110 mm

BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 110 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 110 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช BDS TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30-55 mm.

Drill depth 30-55 mm

BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช BDS HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 30-55 mm.

Drill depth 30-55 mm

BDS Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช Holemaker TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 50-100 mm.

Drill depth 50-100 mm

Holemaker Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช Holemaker HSS Nitto เม็ดมีดไฮสปีด เจาะลึก 25-50 mm.

Drill depth 25-50 mm

Holemaker Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 25-50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 25-50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช China HSS Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30 mm.

Drill depth 30 mm

China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 350 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช China TCT Weldon32 เม็ดมีดคาร์ไบด์ เจาะลึก 35-75 mm.

Drill depth 35-75 mm

China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-75 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-75 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช China HSS Weldon เม็ดมีดไฮสปีด เจาะลึก 30-55 mm.

Drill depth 30-55 mm

China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช China TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 35-100 mm.

Drill depth 35-100 mm

China Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช Euroboor TCT Nitto เม็ดมีดคาร์ไบด์ เจาะลึก 30-55 mm.

Drill depth 30-100 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่านเจ็ทบอช Euroboor TCT Weldon เม็ดมีดคาร์ไบด์ ความลึก 30-100 mm.

Drill depth 30-100 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท