สินค้าทั้งหมด

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

ดูรายละเอียดเพิ่มเติม

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

ดูรายละเอียดเพิ่มเติม

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

ดูรายละเอียดเพิ่มเติม

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

ดูรายละเอียดเพิ่มเติม

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

ดูรายละเอียดเพิ่มเติม

เจาะดอกเจ็ทบอสรูโตสุดได้ 36 ม.ม., ลึก 50 ม.ม. , มอเตอร์ไร้แปรงถ่าน 1600 วัตต์

Endurance magnetic core drill for up to 36 mmใ Small and lightweight single-speed endurance magnetic core drill offering unique performance and service life even under the most challenging conditions in the workshop and on the construction site

ดูรายละเอียดเพิ่มเติม

Compact cordless circular saw for metal

Powerful cordless metal circular saw for rapid, precise cold cuts in sheet metals, pipes and profiles with a cutting depth of up to 57 mm.

ดูรายละเอียดเพิ่มเติม

Metal chop saw

Saw safely with speed and precision with the chop saw for metal.

ดูรายละเอียดเพิ่มเติม

Cordless drill/driver in user set.

The all-rounder ASCM 18-4 QM AS with 7 QuickIN quick-change attachments for maximum efficiency and versatility in drilling, tapping, and screwing. Everything neatly, tidily, and securely stored in the i-BOXX.

ดูรายละเอียดเพิ่มเติม