คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
BIBKO ADD-ON SAND AND GRAVEL SEPARATION
A robust and easy to install separator divides the recycled aggregates into sand and gravel.
0 บาท -
BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR
A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.
0 บาท -
BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE
The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.
The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.
The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.
0 บาท -
BIBKO FILTER PRESS SOLUTIONS
- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs0 บาท -
BIBKO COMTEC RECYCLING SYSTEMS
- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
BIBKO RWS RECYCLING SYSTEMS
- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)
- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm
- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.
- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.
- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.ราคาปกติ: 303,345 บาท
Special Price 197,175 บาท
-
ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB
- alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
- Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
- Permanent higher joint quality by continuous rotation of the square drive.0 บาท -
เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-250
Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.
0 บาท -
เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-260
A state-of-the-art portable inkjet printer which takes product marking and coding to another level.
It is light, handy and wireless. The printer is fully portable and versatile – you can print customized messages in almost every language on many different types of surfaces.
It will print text, graphics, 1D and 2D barcodes.
0 บาท -
เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3
BEVEL LENGTH (L): max 22 mm
BEVEL ANGLE: 15° - 60° (*)0°-60°
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a
Three-phase machines
Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.
Get rid of large quantites of dust
The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:
- a new efficient semi-automatic filter cleaning system
- for easier transportation it has handles both front and rear and the cyclone can be tilted
- for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
- equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
- a new more efficient HEPA filter with a larger filter area
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a
DC Tromb 400 Twin c/L/a
With Twin Power against Dust
- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a
Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h
- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a
Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start
Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container
- Especially suited for parquet grinding and other working operations that produce light dust
- Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
- Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
- Equipped with a steel container0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start
Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container
0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse
Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 59 mmBevel Angle
0° – 60°Plate Thickness
8 – 60 mm (*) 8 – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus
Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 77 mmBevel Angle
15° – 80° (*) 0°-80°Plate Thickness
8 – 100mm (*) 8- 200 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus
Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 80°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 60°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mmPipe
Ø min 3000 mmFeeding Speed
0 -1.4 mt/min0 บาท -
ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG
- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.0 บาท -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link
The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.
The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.
0 บาท -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น M
- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.0 บาท