คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
เพาเวอร์ปลั๊กตัวเมีย 16A (2P+E) 230 V ระดับการป้องกัน IP44
รหัสสินค้า : BS-1081-020 -
เพาเวอร์ปลั๊กตัวผู้ 16A (3P+N+E) 400V ระดับการป้องกัน IP44 ระบบเข้าสายโดยไม่ใช้สกรู
รหัสสินค้า : BS-1081-030 -
เพาเวอร์ปลั๊กตัวเมีย 16A (3P+N+E) 400 V ระดับการป้องกัน IP44
รหัสสินค้า : BS-1081-040 -
เพาเวอร์ปลั๊กตัวผู้ 32A ( 3P+N+E) 400V ระดับการป้องกัน IP44
รหัสสินค้า : BS-1081-050 -
เพาเวอร์ปลั๊กตัวเมีย 32 A (3P+N+E) 400V ระดับการป้องกัน IP44
รหัสสินค้า : BS-1081-060 -
ตัวแปลงหัวปลั๊กชูโก้เป็นพาวเวอร์ปลั๊ก 16A (3P+N+E) 230 V ระดับการป้องกัน IP44
รหัสสินค้า : BS-1080-990CEE adapter 240V / 16A IP44 to DE (Schuko)
Plug: CEE 230 V / 16 A, 3-pin, 50/60 Hz.
Socket: protective contact 230 V / 16 A, 50/60 Hz, IP 44, with increased contact protection.
-
เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น
รหัสสินค้า : CHP-12PUnique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.
The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutesBenefits of plate and tube beveler CHP 12
- High average cutters lifespan : about 1.000 m
- High profitability: Extremely low cost/beveled meter/ minute
- Zero maintenance.
- Self-feed.
- Easy-to-handle and easy to use.
- Flexible.
-
เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator
รหัสสินค้า : GLHZ-5Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust
-
เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E
รหัสสินค้า : 100004PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E45°, 30°, 60° chamfers
The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.
Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics -
สว่านไขควงไร้สาย 18V metabo BS 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
รหัสสินค้า : 602359840- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "