สินค้าทั้งหมด

เครื่องเลื่อยตัดและมิลลิ่งท่อไฟน์ RSG/RDG 1500

The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.

- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.

- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.

- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.

- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.

- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ STS 325 R (แบบใช้ลม)

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ AStxe 649-1 (ปรับระยะชักได้)

Hacksaws for pipes up to Ø 440 mm* with chain extention

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

เครื่องเลื่อยตัดท่อไฟน์ AStx 649-1

Hacksaws for pipes up to Ø 440 mm* (with chain extention)

Powerful hacksaw for pipes and profiled sections.

- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.

- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].

- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.

0 บาท

ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

0 บาท

ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

0 บาท

ปั๊มไฮดรอลิค รุ่น LEVA

- The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
- Small, low weight, reliable - ideal for service use.

- Simple operation, continuously adjustable up to 700 bar.

- Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

0 บาท

ปั๊มไฮดรอลิค รุ่น VELOX

- Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime.
- Simple operation and infinitely adjustable pressure setting up to 700 bar.
- Suitable for 110V or 230V main grids and voltage controlled mobile power units.

0 บาท

ปั๊มไฮดรอลิค รุ่น NOVA

- Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
- Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
- Robust compact design for use on the roughest construction sites

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AT

- Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
- alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
- No checking needed: High repeatability ± 3% for the same bolting process.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AX

- Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
- alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น Norwolf

Hydraulic Wrench System

The alkitronic/Norwolf X DRIVER SYSTEM - the most revolutionary hydraulic torque wrench system ever created.

The profiles are totally flat with no extrusions that create hangups. The design, with a smaller cylinder bore but longer levers, creates less stress on all parts. Easier to get into confined areas and around nuts in hard to access spaces.

With the durability of solid steel design, fewer parts, and clean-lined construction.

0 บาท

pneumatic torque multiplier for comfortable operation at deep bolting connections

ประแจทอร์คทดแรงแบบลม รุ่น CLD-N

- alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
- Torque range: 1,180 Nm to 3,500 Nm.
- Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CLV

- Pneumatic torque multipliers for torques up to 3,460 Nm.
- Multiple fastening connections and series assembly in semi-automatic operations.
- Perfect for bolted applications in hazardous, explosive environments.

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CL

- alkitronic CLS: quick, compact torque multiplier for torques of 60 Nm to 3,500 Nm
- alkitronic CLD: comfortable torque multiplier with rotating handle for torques of 160 Nm to 9,800 Nm
- alkitronic CLS2: high-performance 2-gear machine for torques of 120 Nm to 48,000 Nm
- Continuous rotation, tightening, or loosening for all heavy duty fastening connections
- Perfect for bolted applications in hazardous, explosive environments

0 บาท

alkitronic® E, 2-speed torque multiplier

ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น E

- alkitronic® E, 2-speed torque multiplier for torques from 200 Nm to 10,000 Nm.
- The indestructible workaday torque tool is used to loosen or tighten heavy-duty bolted connections with high on-the-job safety and short assembly times.
- Permanently higher joint quality, compared to ratchet torque tools or tools with impact mechanism, by continuous rotation of the square drive.
- Efficient operation with short fastening cycles: Fast gear for run down and power gear for highest torques and precision.

0 บาท

EFCip-N electric multipliers for comfortable operation at deep bolting connections

ประแจทอร์คทดแรงไฟฟ้าแบบคอยาว รุ่น EFCip-N

- alkitronic EFCip-N electric multipliers for comfortable operation at deep bolting connections due to extended nose.

- torque range: 510 Nm to 3,000 Nm.

- Consistent torque accuracy using all international power supplies 100-253 V / 45-66 Hz even when operating with portable generators.
- Smart processor-controlled shut-off electronic for precise reproduction of the preselected torque (repeatability ± 3% for the same bolting application).

0 บาท

-62%