You have no items in your shopping cart.
All Products
Shop By
Currently Shopping by
-
Brands: CEVISA
, BIBKO
Shopping Options
- Category
- Brands
- FEIN (43)
- EBS (2)
- BAIER (25)
- ALKITRONIC (20)
- BLACKIRON (0)
- OMCA (5)
- CEVISA (3)
- BIBKO (6)
- MARINE TRAVELIFT (0)
- SHUTTLELIFT (0)
- ฺBRENNENSTUHL (31)
- METABO (54)
- EUROBOOR (99)
- DUSTCONTROL (6)
- NODHA (3)
- ROTABROACH (4)
All Products
-
BIBKO ADD-ON SAND AND GRAVEL SEPARATION
A robust and easy to install separator divides the recycled aggregates into sand and gravel.
0 THB -
BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR
A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.
0 THB -
BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE
The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.
The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.
The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.
0 THB -
BIBKO FILTER PRESS SOLUTIONS
- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs0 THB -
BIBKO COMTEC RECYCLING SYSTEMS
- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity0 THB -
BIBKO RWS RECYCLING SYSTEMS
- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity0 THB -
-50% 
WPO 14-25 E - Edelstahl-Start-Setรุ่น
PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E45°, 30°, 60° chamfers
The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.
Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plasticsRegular Price: 63,500 THB
Special Price 31,565 THB
-
-53% 
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust
Regular Price: 106,500 THB
Special Price 50,000 THB
-
-20% 
WPO 14-25 E - Edelstahl-Start-Setรุ่น
Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.
The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutesBenefits of plate and tube beveler CHP 12
- High average cutters lifespan : about 1.000 m
- High profitability: Extremely low cost/beveled meter/ minute
- Zero maintenance.
- Self-feed.
- Easy-to-handle and easy to use.
- Flexible.
Regular Price: 245,000 THB
Special Price 195,000 THB
